COMPARISON
Which rubber sheet to choose, EPDM, SBR or Neoprene
What changes between the three most common rubber sheets: resistance to sun and weather, to oil, to abrasion and to temperature, and which one suits each job.
In short: what is the difference between EPDM, SBR and Neoprene? EPDM is the sheet for outdoor use, because it withstands sunlight, ozone and temperatures from -40 to +120 °C, but not oil. SBR has very good abrasion and impact resistance, but less resistance to ozone and none to mineral oils. Neoprene is the only one of the three with resistance to oils and petroleum products, at a moderate level.
All three are sold in rolls and cut into gaskets, seals, protective linings and flooring. The choice depends on where the sheet will work: sun and water, abrasion, or contact with oil.
The rubber sheets in the catalogue, by material:
EPDM SHEET
For outdoor use, with very good resistance to ozone, sunlight and ageing.
SBR SHEET WITH 2 PLIES
Fabric reinforced, good tensile strength, matt finish.
NEOPREN SHEET WITHOUT PLY – SMOOTH
Good mechanical properties, good bonding to metal, moderate resistance to petroleum products.
The three differences at a glance
| Property | EPDM | SBR | Neoprene |
|---|---|---|---|
| Ozone and sunlight | Very good | Moderate | Good |
| Weather | Very good | Moderate | Good |
| Oils, petroleum products | Not recommended | Not recommended | Moderate |
| Abrasion and impact | Good | Very good | Very good abrasion, good impact |
| Temperature (catalogue sheet) | -40 to +120 °C | See product sheet | See product sheet |
EPDM for sun, water and temperature
The EPDM rubber sheet is rated from -40 to +120 °C and has very good resistance to ozone, sunlight, extreme weather and ageing. It also resists many chemicals and solutions.
This makes it the first choice for anything that stays outdoors all year: seals on doors and covers, gaskets on outdoor equipment, linings exposed to the sun. Its weak point is oil: in contact with mineral oils or fuel, EPDM is not recommended.
SBR for abrasion, impact and floors
The SBR rubber sheet has good tensile strength and resists some organic solutions, salts and acids. It has very good abrasion and impact resistance, while its resistance to ozone, tearing and weather is moderate. Its resistance to mineral oils is minimal.
SBR comes in the widest range: without ply, with one or two plies, smooth or matt, in roll widths of 1, 1.20, 1.50 and 2 metres. The studded and ribbed rubber mattings for work floors are also made of SBR.
Neoprene when oil is present
The Neoprene sheet has satisfactory resistance to corrosion, weather and oxidation ageing, very good mechanical properties and good bonding to metal. It resists moderate acids, alkalis and oils, and has moderate resistance to hydrocarbons.
That is why it is the choice for gaskets on machinery and places where oil or petroleum products drip, but not for continuous immersion in fuel.
Which one to choose
- Outdoors, sun, water, cold or heat: EPDM.
- Flooring, protection from abrasion and impact, indoors: SBR, with ply if reinforcement is needed.
- Contact with oil or petroleum products, bonding to metal: Neoprene.
Frequently asked questions
Which rubber sheet withstands sunlight and weather?
Which rubber sheet is suitable for contact with oil?
What does "with ply" mean on a rubber sheet?
What material are rubber floor mats made of?
Sources
- MSC Industrial Supply, Rubber Sheets Resistance Chart. https://www.mscdirect.com/resources/buying-guides/rubber-sheeting
Request a quote or information
Fill in the form and we will get back to you as soon as possible.
